indoor sports lighting
Site conditions before fixture selection.
Apply the project brief to indoor sports lighting: record sport and level-of-play requirements and supply controls and project evaluation criteria before asking for an alternative. Use the application description as an input to supplier review; do not assert a universal product rating, installation result, or project approval. Gymnasiums, indoor courts, and multi-use halls share some mounting questions and differ on glare, camera work, and ceiling structure.
Project information to collect
Indoor sports lighting is limited by ceiling height, truss locations, existing control gear, and whether the space is used for one sport or several. We do not provide installation, aiming, or league certification. A wet location or IP rating from an outdoor catalog does not automatically apply to an indoor hall.
- Scene and dimensions: court or hall length and width, mounting height, obstruction from trusses, and whether the designer already issued a layout. Photographs help only as site context; they are not photometric evidence.
- Interface records: input voltage, dimming interface, whether constant current or constant voltage drivers are in the existing system, and any occupancy or house-light overlap that the electrical team must keep.
- Approval and delivery: who accepts glare and uniformity questions, whether an IES photometric file is required, packing into the building, and destination. Structural, aiming, and commissioning stay with the qualified project team.
How do site constraints change sport and level-of-play requirements? A recreational basketball hall and a broadcast volleyball court can occupy similar floor plates while asking for different luminous flux, correlated color temperature, color rendering index, and glare control. Supply controls and project evaluation criteria should be written before factories are asked to “just match last year’s wattage.” Compare light output and distribution before wattage; a higher wattage is not a better hall result. Beam angle and mounting height interact; swapping a narrow optic into a lower ceiling is a design decision, not a catalog upgrade.
| Selection check | Indoor sports lighting | Outdoor field floods |
|---|---|---|
| Mounting | Ceiling height, truss clash, indoor aiming stay with the project team | Pole or structure height, visors, wet-location hardware named on the quote |
| Environment | An outdoor IP rating or wet location note does not transfer to a dry hall | IP rating and wet location apply only when the quoted enclosure states them |
| Acceptance | Glare and CRI questions for cameras or mixed-use courts, written before RFQ | Broadcast or recreation glare notes stay on the same revision as the IES file |
Which decisions require the buyer or qualified project team rather than the sourcing service? Acceptance of playing criteria, structural attachment, aiming, and commissioning. We can request model documents and compare factory scopes on manufacturer matching, then keep control questions on led sports field lighting even when the immediate job is indoor. Outdoor field work still belongs to a separate brief; do not copy an indoor hall IP note onto a pole-mounted flood without checking wet location and aiming hardware.
Continue from the fixture options or the checklist article. Empty specification cells stay empty until the designer or buyer fills them.
Send indoor sports lighting conditions you can already measure
- Ceiling or mounting height, sport, and hall use
- Quantity with units and input voltage
- Destination; glare target stays open if unwritten
We will not treat a missing glare target as a promise that none exists.
Discuss Requirements